Get QuoteBuyer ToolsShort answer: A single steel bed for a hostel is usually made for a 3 × 6 ft (915 × 1830 mm) or 3 × 6.25 ft (915 × 1905 mm) mattress, with the base about 400–450 mm off the floor. Choose the base type (steel strips, wire mesh or a board platform) to suit the mattress, and fix the mattress size before you order the beds.

A single steel bed (often called a steel cot or steel palang) is a one-person bed with a welded or bolted mild steel frame and a base that holds the mattress. Hostels, PGs, staff quarters, hospitals and worker camps use it because it does not sag, swell or attract termites, and it is easy to clean and move.
Compared with a steel bunk bed, a single bed sleeps one person instead of two on the same floor area, but gives more privacy and is easier for older staff or students with an injury. Many buildings use bunk beds in shared rooms and single beds in warden, supervisor or senior rooms.
The bed is built around the mattress. The frame usually adds about 25–50 mm on each side. These are typical sizes used in India:
| Mattress (feet) | Mattress (mm) | Typical floor footprint | Common use |
|---|---|---|---|
| 2.5 × 6 ft | 760 × 1830 | About 0.81 × 1.88 m | Very small rooms, worker camps |
| 3 × 6 ft | 915 × 1830 | About 0.97 × 1.88 m | Most hostels and PGs |
| 3 × 6.25 ft | 915 × 1905 | About 0.97 × 1.96 m | Hostels with taller students, staff quarters |
| 3 × 6.5 ft | 915 × 1980 | About 0.97 × 2.03 m | Hotel staff rooms, senior staff |
| 3.5 × 6.25 ft | 1065 × 1905 | About 1.12 × 1.96 m | Warden or faculty rooms |
Typical heights: the top of the base is about 400–450 mm (16–18 inches) from the floor, so with a 100–150 mm (4–6 inch) mattress the sitting height is close to a chair. A headboard, if fitted, is usually 750–900 mm high. For two-tier beds, see our bunk bed size guide.
We make 300–400 beds in 2–3 weeks on a bulk order, with a 2-year guarantee in India.
| Base | What it is | Good for | Watch out for |
|---|---|---|---|
| Steel strips or slats | Flat steel strips welded across the frame | Foam and coir mattresses; hard daily use | Gaps too wide let a thin mattress sink between strips |
| Wire mesh | Woven or welded wire mesh on the frame | Airflow under the mattress; lighter beds | Cheap mesh can sag in the middle over time |
| Board platform | Plywood or board panel on steel supports | Thin mattresses; a firm, flat feel | Less airflow; board must be kept dry |
| Perforated steel sheet | Steel sheet with holes for air | Hospitals, camps, easy cleaning | Heavier than strips or mesh |
For most hostels, a strip base with close spacing or a board platform works best with a 4-inch foam or coir mattress.
We make steel beds and hostel bunk beds with or without under-bunk drawers, along with wardrobes, almirahs, lockers and study tables, at our own factory in Sonipat, Haryana. Indicative price for a single steel bed on this site is ₹5,500–₹9,500 per bed, exclusive of 18% GST; your quote depends on size, base and quantity. See the bunk bed price guide for more.
| Item | Detail |
|---|---|
| Material and finish | Powder-coated mild steel from TATA Steel and JSW; powder coat 80–100 microns, cross-hatch tested |
| Sizes | Made to your mattress size and room layout, confirmed with a drawing |
| Capacity | 300–400 beds in 2–3 weeks on a bulk order |
| Lead time | Confirmed in writing with the quotation |
| Minimum order | No minimum order in India; bulk orders get 10–20% discount |
| Price | Quote-based, exclusive of 18% GST; delivery charged extra |
| Guarantee | 2 years in India, 1 year on export |
| Certification | ISO 9001:2015 and Greenpro certified |
Send your mattress size, number of beds and room plan to sales@royalsafeco.com for a drawing and itemised quotation.
Most single steel beds in India are made for a 3 × 6 ft (915 × 1830 mm) or 3 × 6.25 ft (915 × 1905 mm) mattress. With the frame, the bed takes up about 0.97 × 1.9 m of floor.
The top of the base is typically 400–450 mm (16–18 inches) from the floor. With a 4–6 inch mattress, that gives a comfortable sitting height.
A closely spaced steel strip base or a board platform suits the 4-inch foam or coir mattresses used in most hostels. Wire mesh gives more airflow but cheap mesh can sag.
The indicative range published on our site is ₹5,500–₹9,500 per bed, exclusive of 18% GST and delivery. The final price depends on size, base type and quantity, and bulk orders get 10–20% discount.
Bunk beds fit two students on the same floor area and suit shared rooms. Single beds give more privacy and suit warden rooms, senior staff and students who cannot climb.