Get QuoteBuyer Tools
Lockers & Storage · Buyer's Guide

Factory Lockers: Best Steel Locker for Factories and Warehouses (2026)

Short answer: the best locker for a factory or warehouse is a full-height, powder-coated steel locker with ventilation louvres, a sloping top, a raised base and a strong lock on every door. Use single or 2-tier lockers where workers change into uniforms and safety shoes, and 4 or 6-door lockers where they only store a bag and phone. Plan one compartment per worker on the largest shift, plus spare.

Ventilated steel lockers for factory and staff changing rooms
Ventilated steel lockers — The Royal Safe Company

What Makes a Good Factory Locker

FeatureWhat to look forWhy it matters on a shop floor
Steel and finishMild steel sheet with an even powder coatResists rust, oil, dust and daily knocks better than paint or wood
VentilationLouvres on each doorSweaty uniforms and safety shoes dry and do not smell
Sloping topAngled roof on the locker bankStops bags and tools being dumped on top, and is easier to clean
Raised base or plinthLocker stands off the floorKeeps the bottom tier dry when floors are washed
LockPadlock hasp, key lock with master key, or combination lockEvery worker's belongings stay secure
Number platesNumbered doorsEasy to assign lockers by employee and shift
Wall or floor fixingPre-drilled fixing pointsStops a loaded locker bank from tipping

Which Locker Type for Which Workers?

Locker typeCompartmentsBest for
Single-door (full height)1Workers who hang a full uniform and keep safety shoes
2-tier2Uniform plus bag, where space is limited
4-door4Bags, lunch boxes and phones — see the 4-door steel locker guide
6-door and locker banks6–12Large workforces in a small changing room — see the 12-door locker bank guide

A full-height locker is typically about 1800 mm (6 ft) high and 450 mm deep. More doors in the same height means smaller compartments. Typical sizes and indicative prices are in our steel locker size and price guide.

How Many Lockers Does a Factory Need?

  1. Count workers on the largest shift, plus supervisors and contract staff who change on site.
  2. Decide whether lockers are shared between shifts. Shared lockers need combination locks or padlocks that workers bring and remove.
  3. Add 10–15% spare for new joiners and seasonal workers.
  4. Split by changing room — men and women, and separate areas for canteen or clean-room staff if needed.

Our guide on how many lockers you need per employee walks through the count in detail.

Warehouses and Stores: Lockers Plus Racks

Warehouses usually need two kinds of storage: lockers for staff belongings, and racks for stock. Keep them separate — open racks do not lock. For cartons and spare parts, see our slotted angle rack size and load guide; for heavy palletised loads, deck panel racks.

Common Mistakes When Buying Factory Lockers

Ordering Factory Lockers from The Royal Safe Company

What you need to knowDetails
Configurations1, 2, 4 and 6-door lockers and multi-column locker banks; custom sizes to your changing room
MaterialPowder-coated mild steel from TATA Steel and JSW, made in our own factory in Sonipat, Haryana
CertificationsISO 9001:2015 and Greenpro
Minimum orderNo minimum for orders within India; export orders from USD 3,000
PriceQuoted per order, exclusive of 18% GST; delivery charged extra
Guarantee2 years in India, 1 year on export orders

See our steel lockers, the institutional lockers buyer's guide and steel lockers in Delhi.

Send your worker count per shift, changing-room size and preferred lock type to sales@royalsafeco.com for a layout and quotation.

Frequently Asked Questions

What is the best locker for a factory?

A full-height, powder-coated steel locker with ventilation louvres, a sloping top, a raised base and a strong lock on every door. Single or 2-tier lockers suit workers who change into uniforms; 4 or 6-door lockers suit bag-only storage.

How many lockers does a factory need?

Plan one compartment per worker on the largest shift if lockers are shared between shifts, or one per worker if each has their own, then add 10–15% spare for new and seasonal workers.

Should factory lockers have ventilation?

Yes. Louvres on each door let sweaty uniforms and safety shoes dry and stop the lockers smelling.

Which lock is best for factory lockers?

Padlock hasps are simple and easy to reassign; key locks with a master key suit permanent staff; combination locks suit lockers shared between shifts.

Do you make lockers for factories and warehouses?

Yes. The Royal Safe Company makes 1, 2, 4 and 6-door steel lockers and locker banks in its own factory in Sonipat, Haryana, with no minimum order in India and a 2-year guarantee.

What are the best lockers for factory workers?

Full-height single or 2-tier steel lockers with ventilation louvres, a sloping top and a hasp for a padlock suit most factory workers. Workers who change into uniforms need a full-height locker; office and store staff can share 4-tier lockers.